Best Side-Cutting Pliers
If you are looking for a good, reliable pair of side-cutting pliers to use then this article is just for you. We have done the research and found the best pliers on the market. They come in at about $9-$10 dollars depending on where you purchase them from. They also come in various shapes and colors so if that matters to you then this may interest you too! You can find these online or most hardware stores will carry these as well
Quick View (Our Top 3): Best Side-Cutting Pliers
Let’s jump ahead and see the complete list of the best side-cutting pliers list.
10 Best Side-Cutting Pliers List
SaleBestseller No. 1 
IRWIN VISE-GRIP Diagonal Cutting Pliers, 8", 2078308, nichel chromium steel
- Durable nickel chromium steel construction
- ProTouch grips provide extra comfort and reduces hand fatigue
- Induction hardened cutting edge stays sharper, longer
- Meets or exceeds ANSI specifications
- Backed by the IRWIN VISE-GRIP Lifetime Guarantee
$18.25 
Buy on Amazon SaleBestseller No. 2 
CRAFTSMAN CMHT81647 7-in. Diagonal Pliers
- COMFORT AND CONTROL: Multi-zone bi-material grips
- INDUCTION HARDENED: Cutting edges stay sharper longer
- STRENGTH AND DURABILITY: Drop forged steel
- Corrosion-resistant finish
$9.99
Buy on Amazon Bestseller No. 3 
CRAFTSMAN Pliers, Electrical 6-in. Diagonal (CMHT81646)
- COMFORT AND CONTROL: Multi-zone bi-material grips
- INDUCTION HARDENED: Cutting edges stay sharper longer
- STRENGTH AND DURABILITY: Drop forged steel
- Corrosion-resistant finish
$9.99
Buy on Amazon Bestseller No. 4 
Klein Tools D248-8 Pliers, Made in USA, Diagonal Cutting Multi-Purpose Pliers with Angled Head, High-Leverage Design, and Short Jaw, 8-Inch
- Diagonal Cutters with angled head design for easy work in confined spaces
- High-leverage pliers with rivet closer to the cutting edge for 36-percent greater cutting power than other plier designs
- Short jaws and beveled cutting edges permit close cutting of wire
- Induction-hardened cutting knives for long life
- Made in USA with Custom, US-made tool steel
$29.97
Buy on Amazon SaleBestseller No. 5 
Klein Tools D248-9ST Diagonal Cutting Pliers, Ironworker's Diagonal Cutters with High Leverage Design, Made in USA, Works as Rebar Cutter and Rebar Bender, 9-Inch
- Ironworkers' pliers for soft annealed rebar tie wire
- Short jaws and beveled cutting edges permit close cutting of wire
- Hooked handle for reduced slippage
- Angled head design for easy work in confined space
- Made in USA with Custom, US-made tool steel
$30.85
Buy on Amazon SaleBestseller No. 6 
IRWIN VISE-GRIP Diagonal Cutting Pliers, 6", 2078306
- Durable nickel chromium steel construction
- ProTouch grips provide extra comfort and reduces hand fatigue
- Induction hardened cutting edge stays sharper, longer
- Machined jaws for maximum gripping strength
- Meets or exceeds ANSI specifications
$9.49
Buy on Amazon SaleBestseller No. 7 
KNIPEX Tools 74 21 200, 8-Inch High Leverage Angled Diagonal Cutters
- High leverage Diagonal Cutters for very tough, continuous use
- 20% reduction in required force compared to conventional diagonal cutters of the same length
- Precision cutting edges
- High leverage means less force required because the rivet is cloer to the cutting edge
- Cutting Capacity - up to 11/64" for medium wire, up to 1/8" for hard and up to 3/32" for piano wire
$36.00
Buy on Amazon SaleBestseller No. 8 
WORKPRO 7-Inch Diagonal Pliers in CRV Steel for Cutting Wires, Bi-material Handle Comfort Grip
- Transparent electrophoretic coating and covered in will help to prevent getting rusty. Wipe these pliers before using, then store them in a dry environment
- Made of 50CrV steel with heat treated and blackening surface will ensure higher hardness, better clamping force, toughness and durability. Hardened cutting edges for increased cutting ease, and fine polishing for corrosion resistance
- Bi-material handle for anti-slip and comfort grip, exquisite workmanship with 3 colors provides a beautiful look for you
- Heat treated hardness up to 48 HRC, high-frequency treated hardness up to 65 HRC
- Ideal for cutting wires quickly and effectively
$11.99
Buy on Amazon Bestseller No. 9 
Crescent 8" Pro Series Diagonal Compound Action Dual Material Cutting Pliers - PS5429C
- 9" Crescent Pro Series diagonal compound action pliers
- Made with co-molded grips for added comfort
- Compound leverage design provides 50% increase in cutting power
- Induction-hardened edges for a long cutting life
- 1/3 lighter than standard pliers for reduced fatigue
$15.80
Buy on Amazon Bestseller No. 10 
Klein Tools J2000-48 Pliers, Diagonal Cutting Pliers with Angled Head, Heavy-Duty to Cut ACSR, Screws, Nails, and most Hardened Wire, 8-Inch
- Diagonal Cutters with angled head design for easy work in confined spaces
- Pliers cut ACSR, screws, nails, and most hardened wire
- High-leverage design. Rivet is closer to the cutting edge for 36-percent greater cutting power than other plier designs
- Short jaws and beveled cutting edges permit close cutting of wire
- Made in USA with Custom, US-made tool steel
$39.99
Buy on AmazonDon’t forget to keep a plier in your next job. It can be very useful and handy in a lot of cases.
Last update on 2025-02-22 / Affiliate links / Images from Amazon Product Advertising API
