10 Best Power Jointers in 2025

The best power jointers are not always the most expensive. If you’re looking for a good deal on an affordable, reliable power jointer, then this is the article for you! Let’s take a look at different models and their features.

Quick View (Our Top 3): Best Power Jointers

#	Product	Price
1	PORTER-CABLE Benchtop Jointer, Variable Speed, 6-Inch (PC160JT)	$549.00	Buy on Amazon
2	Festool 574432 Domino Joiner DF 500 Q Set	$1,279.00	Buy on Amazon
3	WEN JN8504 8.5-Amp Plate and Biscuit Joiner with Case and Biscuits	$57.99	Buy on Amazon

Besides the top 3 list, there are a lot more different options out there. Let’s take a look at our complete list of the best power jointers.

10 Best Power Jointers List

SaleBestseller No. 1

WEN JT630H 10-Amp 6-Inch Spiral Benchtop Jointer

Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finish
Features a spacious 30-by-6-inch table
Remove 0 to 1/8 of an inch of material with each pass

Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees

Bestseller No. 2

Cutech 40180HI 8-Inch Spiral Cutterhead Benchtop Jointer with Cast Iron Tables, 16 TC Inserts, Extra Long 24" Aluminum Fence, Additional 7-3/8" Fence Brackets, and a 10-amp Motor

Spiral Cutterhead - Cutterhead with 6 rows that holds staggered tungsten carbide inserts for a smooth finish. The design of the cutterhead along with the use of in-house made inserts make cuts with the lowest amp draw compared to others.
Two-sided Inserts - Two-sided inserts sit in perfect alignment to the spiral cutterhead. Non-cutting edge designed to prevent insert from skewing while planing. The precision is superior to 4-sided inserts.

Adjustable 24" long aluminum Fence - Features quick stops at 90° and 135° for versatile cutting angles.
Fence Enhancement Brackets - Fence enhancement brackets stabilize both ends of the fence for a flawless cut. (Patented in Taiwan.)
Elevation Control - Say goodbye to table inconsistencies with the additional guide post. Parallel tables translate to straight cuts at any different depth.

SaleBestseller No. 3

WEN JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table

Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish
Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches
Remove 0 to 1/8 of an inch of material with each pass

Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees

SaleBestseller No. 4

WEN JT3062 10-Amp 6-Inch 2-Blade Benchtop Jointer, Black

10-amp motor provides up to 22,000 cuts per minute anywhere from 0 to 1/8 of an inch in size
Onboard depth scale makes for easy adjustments to the depth of cut

Features a spacious 30-by-6-3/16-inch table
Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees
Includes an onboard depth-of-cut scale, two push blocks, 2-1/2-inch dust port, and a two-year warranty

Bestseller No. 5

CRAFTSMAN Benchtop Jointer, Up to 22,000 cuts per Minute, 10 Amp, Corded (CMEW020)

Variable speed: range of 6,000 to 11,000 RPM allows the user to select the right speed for the size and hardness of material
Easy replacement and knife adjustments: two-knife cutter head with Jackscrew knife leveling arrangement allows for easy replacement and adjustment of knives
Accurate cutting: center-mounted fence gives needed support throughout the cut for accurate edge jointing

Hard and soft woods: heavy duty 10 Amp motor provides power for hard and soft woods
Support and accuracy: 4-1/4-in center mounted fence for support and accuracy

Bestseller No. 6

Cutech 40160HB 6-Inch Spiral Cutterhead Benchtop Jointer with teflon-Coated Aluminum Tables, 12 TC Inserts, 19-5/8” Aluminum Fence, and a 10-amp Motor (Rifle Green, 6 inch)

CUTECH SPIRAL CUTTERHEAD - Cutterhead with 6 rows that holds staggered inserts for a smooth finish. The spiral cutterhead is known for its reduced noise levels and smoother finishes, making it ideal for beginners who want professional results without frustration. The design of the cutterhead along with the use of in-house made inserts make cuts with the lowest amp draw compared to others.

TWO-SIDED INSERTS - Two-sided inserts sit in perfect alignment to the spiral cutterhead. Non-cutting edge designed to prevent insert from skewing while planing. The precision is superior to 4-sided inserts.
DEPTH OF CUT POINTER - Clear and accurate scale and pointer for a precise measured cut every time.
ADJUSTABLE FENCE - Adjustable 19-5/8" fence with quick stops at 90° and 135°.

6H TEFLON COATING TABLE SURFACE - This layer of coating reduces table scratches, increases the hardness of the aluminum table to 6H, thus extending the life of the tables.

SaleBestseller No. 7

RIKON Power Tools 8" Benchtop Jointer with Helical Style carbide Cutter Head & SP Coated Aluminum Table.…

Synthetic Polymer Coated Aluminum tables reduces friction and scratches for ease of use
Helical Cutter head with 16 two-sided carbide inserts

Large 19 3/4" x 4 3/8" Fence tilts 90° to 135°
Safety on/off switch. Easy read depth scale. Easy read depth scale. Portable at only 49 lbs.
flatten 8 inch wide board. Full table size 30-1/2" x 8-3/16" extends to 51-1/2" x 8-3/16"

Bestseller No. 8

WEN Multi-Purpose Rolling Planer and Miter Saw Tool Stand with Extension Rollers (MSA658T)

Adjustable rollers expand up to 54.3 inches for additional workpiece support
Metal top provides a reusable work surface that requires no drilling unlike MDF alternatives
Retractable swivel caster quickly turns the stand from stationary to mobile

Compatible with the majority of saws and planers on the market
Designed to support any WEN Benchtop Planer or Miter Saw

SaleBestseller No. 9

Wahuda Tools Jointer - 8-inch Benchtop Wood Jointer, Spiral Cutterhead Portable Jointer, Cast Iron Tables w/Pull Out Extensions, 4-Sided Carbide Tips & 10amp Motor, Woodworking Tools (50180CC-WHD)

No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.

Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135° for versatility.

Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too!

Bestseller No. 10

WEN JN8504 8.5-Amp Plate and Biscuit Joiner with Case and Biscuits

Perfect for edge-joining panels, aligning boards, strengthening joints, and more
Adjustable fence helps create biscuit slots at any height or angle

Pre-set stops easily adjust to create slots for standard #0, #10, and #20 biscuits
8.5-amp motor rotates the 4-inch carbide-tipped blade at 10,000 RPM

Picking a power jointer will not be difficult anymore. Take the right tool and work smart, that’s all we want from you.

Article Read: 434

Last update on 2025-07-22 / Affiliate links / Images from Amazon Product Advertising API