Best Nail Puller Pry Bar
The best nail puller pry bar is a tool used for getting nails out of wood, concrete, and other hard surfaces. It can also be used to remove boards from the ground or walls. These tools are often made with metal heads on one end and a clawed surface at the other end that provides traction against the nail head while pulling it out.
Quick View (Our Top 3): Best Nail Puller Pry Bar
If you still can’t make up your mind, then go ahead and take a look at our complete list of pry bars.
10 Best Nail Puller Pry Bar List
Bestseller No. 1 
Premier Pry Bar – Open Angle Heavy Duty Pro Bar | Leverage to Handle any Job | Prying Concrete Forms, Embedded Objects, Aligning Walls or Heavy Pipes | Heavy Duty Construction
- 🚧 Used for stripping poured in place form panels
- 🚧 Excellent for tilt-up panel rigging
- 🚧 Great all around prybar tool
- 🚧 Heavy-duty heat-treated tip
- 🚧 Comes with a comfortable grip handle
Bestseller No. 2 
ValueMax 2-piece Flat Pry Bar Set, Includes 7-1/2” Mini Pry Bar, 15” Heavy Duty Nail Puller, Claw Bar, Wonder Bar, Corrosion Resistant Carbon Steel Made, for Kitchen Remodel, Prying Apart Boards
- DURABLE MATERIAL - Pry bar set is made of high-quality carbon steel, and surface is sprayed with plastic to improve durability and prevent corrosion. The heat-treated crowbar is very strong and flexible, which can avoid breaking during use.
- VERSATILE CONSTRUCTION - The curved claw improves leverage and reduces damage to work piece. Flat claws can be inserted deeper into narrow spaces, thus increasing leverage. The nail groove function makes it easier to pull nails with utility pry bars.
- WIDE APPLICATION - ValueMax pry bar is strong enough to handle difficult tasks and easy to control, which can assist with a wide variety of DIY tasks, such as lift flooring, remove moldings, extract nails, and more.
- CONVENIENCE - Utility pry bar set includes 15” heavy-duty pry bar and 7.5” mini nail puller. Two different size of pry bars meet the needs of multiple tasks. Crowbar complies with relevant environmental protection requirements.
- TIPS - Nail pullers can be used when precision and control are needed for nail pulling, levering, lifting, scraping. Clean pry bar's surface and dry it after use, which will help to extend service life of crowbar.
Bestseller No. 3 
Spec Ops Tools 10" Nail Puller Cats Paw Pry Bar, High-Carbon Steel, 3% Donated to Veterans,
- Up to 20% lighter, carbon-steel design for sniper control
- Dual strike zones for rapid nail extraction
- Precision-honed claws remove embedded or headless nails with minimal damage
- Two nail pullers for added versatility
- Compatible with SRS Retention Lanyards for added safety
SaleBestseller No. 4 
Edward Tools Wonder Bar Utility Pry Bar - Nail puller/Chisel ends - Perfect tool for prying, scraping, lifting, pulling - Extra strength carbon steel - Leverage design - Rust proof finish (15 Inch)
- Extra strength carbon steel utility bar
- Powder coated finish to resist rust and last longer
- Extra leverage design
- Ideal utility bar for prying, scarping, lifting and pulling - Nail puller on both ends
- Lifetime warranty
Bestseller No. 5 
Estwing HB-21 21” Forged Half Round Handy Bar
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available
- LIGHTWEIGHT & DURABLE – Rounded construction to reduce weight & increase strength
- HIGH LEVERAGE DESIGN – Engineered to produce maximum torque when pulling nails & prying boards
- EXTRA WIDE BLADE – 1-3/4" wide blade to reduce marring when pulling tough nails
- GREAT FOR TRIM WORK – perfect for window & door trim, molding and baseboard
Bestseller No. 6 
WORKPRO 2-Piece Nail Puller Set, 12” Pry Bar, 8” Mini Crowbar, Cats Paw Nail Remover, Claw Bar, for Kitchen Remodel, Prying Apart Baseboard, Multi-sided Forged Steel Made
- APPLICATION: Polished pry bar end can be wedged into narrow spaces. The angled edge is fit for pulling apart walls, prying off decorative strips, tiles, wood panels and removing moldings, nails & trim, and more. It can be very useful when you’re recycling used pallets or other salvaged wood.
- HIGH HARDNESS: Crowbar is forged from high-quality carbon steel, with high hardness & durability. The bending strength of 8" crowbar is greater than 500 inch pounds. The bending strength of 12" crowbar is greater than 1200 inch pounds.
- RUST-PROOF DESIGN: Surface of pry bar is coated with anti-rust oil, which can effectively avoid surface rust and have a longer service life. 8" crowbar weighs 180 grams, and 12" crowbar weighs 420 grams.
- VERSATILE CONSTRUCTION: The design of L-shaped crowbar helps increase torque, and with the help of leverage, it is convenient to use. It is recommended that you clean the surface and dry it after use, which will help to extend the service life of the crowbar.
- CONVENIENCE: Crowbar complies with relevant environmental protection requirements and can be used with confidence. The head of crowbar allows for striking as a hammer. Hexagonal shaft has six sides for better grip and is great for levering.
SaleBestseller No. 7 
Stiletto TICLW12 Clawbar Titanium Nail Puller
- Made of good quality products
- Select propellants that deliver consistent accuracy and performance
- Product is manufactured in Taiwan
- Lightweight solid titanium
- Super strong prying power
SaleBestseller No. 8 
Spec Ops Tools 11" Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans,
- Up to 20% lighter, high carbon steel design for sniper control
- Dual strike zones for rapid nail extraction
- Extra-wide, 30º blade for on-target molding removal
- Precision-honed claw end removes embedded or headless nails with minimal damage
- Two nail pullers for added versatility
SaleBestseller No. 9 
Estwing PB-18 18" Pry Bar, Forged, I Beam Construction
- FORGED IN ONE PIECE – The most durable, longest lasting striking tools available
- HIGH LEVERAGE DESIGN – Reinforced rocking head for maximum leverage
- BUILT FOR THE PRO – Carpenters, wood workers, demolition crews, framers, roofers, tradesmen & serious DIYers. Perfect for window & door trim, molding and baseboard
- VERSATILITY – Use angled chisel end for prying and lifting
- MADE IN THE USA – Our tools are proudly crafted in Rockford, IL using the finest American steel
Bestseller No. 10 
Flat Pry Bar, Heavy Duty Handy Crowbar, 12 IN Pry Tool, Head Teardrop Nail Puller, High-Carbon Steel Hand Crowbar Tool, Red
- 🗽【PRACTICALITY CROWBAR】Three nail slots (one at each end, one in the middle) lets you get at nails from any angle.Thin, sharpened chisel tips slide easily into the tightest cracks and crevices.
- 🗽【HIGH LEVERAGE DESIGN】Elbow and flat head design, make full use of the principle of leverage, which can generate maximum torque when pulling nails and prying boards, thus saving your energy.
- 🗽【RUST PROOF FINISH】The polished surface is treated with transparent lacquer for anti-rust prevention.The paint is smooth, uniformly stressed, and beautiful.
- 🗽【MULTIPURPOSE PRY BAR】The cutting edge is very sharp and refined, which can reduce damage when pulling hard nails and convenient to operate. Ideal utility bar for prying, scarping, lifting and pulling - Nail puller on both ends.
- 🗽【ONE-PIECE FORGING】High-strength metal, one-piece forging, complete heat-treatment steel structure, thickness to 5.5 mm, strong load-bearing capacity at least 185lb without bending.
Hope it will be easier for you to pick the right pry bar now. Happy DIYing.
Last update on 2022-07-27 / Affiliate links / Images from Amazon Product Advertising API
