Best Stationary Drill Presses
Our in-depth guide on the best stationary drill presses. We’ll go over what features and specs a quality drill press should have, what’s the difference between benchtop and floor models, how to use them safely, how much they cost range from, and finally provide you with my list of recommendations for some of the best ones available.
Quick View (Our Top 3): Best Stationary Drill Presses
Now that you have seen the top 3 list. If you still want to explore more and see what other options are available, take a look at our complete list.
10 Best Stationary Drill Presses List
- ARTICULATING DRILL PRESS STAND: Drills perpendicular and angled holes in 15-degree increments, up to 90 degrees horizontal.
- TOOL HOLDER: Holds rotary tool at 90 degrees horizontal for tasks such as polishing metal objects, sanding different shapes and grinding metal piece. Drill depth- 2 inches
- COMPATIBILITY: Fits Dremel Rotary Tool Models: 4300, 4000, 3000,200, 100, 8250, 8240, and 8220.
- FLEX SHAFT TOOL STAND: Allows Telescopic adjustment to any height between 16 and 29 inches.
- CORD MANAGEMENT: Clips included for safe storage of power cords, inch/metric marking on base for accurate drilling of workpiece, depth markings with depth stop - for consistent depth, sturdy metal base with 4 clamping points - to securely hold the station.
- POWERFUL 6.2A MOTOR: Equipped with a powerful 6.2A induction motor (most 12-IN drill press motors are only 5A), provide you constant power to drill through all kinds of material
- PROFESSIONAL DRILL PRESS: 1/32" - 5/8" Keyed chuck, 12" swing, 3-1/8" spindle travel, and overall height of 39" (2" high than other 12" drill press)
- VARIABLE SPEED: You can easily adjust the speed from 580 to 3200 RPM, satisfying your drill needs from wood to all kinds of metal. Digital speed readout helps precisely control the speed
- FULLY ADJUSTABLE WORK TABLE: The flat work table can rotate 360° and bevel 45° left or right
- EXTRA SUPPORT: This drill press equips with a Class IIIA 2.5mW laser, work light, emergency stop switch, and no voltage release switch, help you work precisely and safely
- 5/8in. chuck capacity with 1in. maximum drilling capacity
- 3 1/4in. vertical stroke
- 13in. swing adds versatility
- 45 degree table tilt offers a multitude of drilling angles
- Depth lock with a ball knob handle for precise adjustments that stay true, hole after hole
- 4-3/4-inch spindle travel makes drilling through 4x4 boards easier than ever
- Three-spindle design provides twelves speeds from 150 to 3150 RPM
- High torque performance perfect for metal, hardwood, softwood, plastic and more
- 14-inch by 14-inch cast iron work table pivots up to 45 degrees in both directions
- Measures in at 25 by 12 by 63 inches in size with a weight of 214 pounds
- INCLUDES - 48" Table, 48" Fence, Drawer Base, (2) Flip Stops, and (2) Knuckle Clamps.
- ALL NEW DP-PRO FENCE - The heart of the system is now made tall enough to support vertical work as well as horizontally. We also created the new DP-PRO Flip Stops with built-in thumbwheel micro-adjustment to match the fence perfectly.
- INTEGRATED DUST COLLECTION - The new taller fence was turned into an integrated dust collection duct with its opening right at the center of the fence where the chips are created. Just attach a vacuum or dust collector at the port at the end of the fence (either side).
- SLIDE OUT EXTENSION WINGS - The table is designed with extension wings that slide out for extra support when you need it and tuck back in tight to the central table and out of the way when you don't. The 48" table is 36" closed and 48" extended.
- NEWLY DESIGNED DP-PRO DRAWER BASE - The foundation of the system solves both problems of attaching to an exisiting table and maintaining clearance fo the elevation crank. It includes hardware to fit virtually any drill press table wheter it has T-Slots or through-slots, diagonal or parallel.
- Drill press vise with stationary base and 6" nominal jaw width provides clamping action for heavy-duty drilling applications
- Stationary base creates a firm foundation when mounted to a drill press bench
- Stationary jaw has a horizontal and vertical V-groove for enhanced grip of circular stock
- Cast ductile iron for precision and high strength
- Made in USA and meets Fed. Spec. GGG-V-443-A Type I, Class 2, Style C and qualifies as NSN 3460-00-293-0272
- Sturdy construction with laminated surfaces, top & bottom
- T-tracks t add stops & hold downs
- Fast & Easy Installation
- Fences will work with any after-market table
- Powered by an efficient 3/4 HP, 1Ph, 115V TEFC motor and poly-v belt drive system
- One-handed belt tensioning allows for rapid speed changes
- 14" x 19" precision-ground cast iron work table features twin T-slot grooves and four table slots
- Power switch features a safety key and large, paddle-style off button
- Xacta-X laser system easily identifies the drill center
- Motor size: 1 HP, 1,720 RPM
- Switch: Toggle type
- Spindle travel: 3-1/4-inch
- Accepts 5/8-inch drill chuck
- Built-in 110V light socket
- Features a 2.3A induction motor, an 8-inch swing, and a 2-inch spindle travel
- Includes a 1/2-inch keyed chuck and onboard key storage
- Operates at 5 different speeds: 740, 1100, 1530, 2100, or 3140 RPM
- 6.5 by 6.5 inch height adjustable worktable bevels up to 45 degrees in each direction
- Measures in at 23 inches tall with a 7 by 11-inch base
We thrive to make life easier for all the handymen out there. Pick the suitable stationary drill press and start working on your project.
Last update on 2024-09-13 / Affiliate links / Images from Amazon Product Advertising API